Victorian Style Valentine Banner Tutorial

Graphic 45-Time to Flourish-Valentine Banner-Reneabouquets-Kathy Clement-Kathy by Design-Photo 01

Victorian Style Valentine Banner Tutorial with G45 Time to Flourish and Reneabouquets

Hello, Friends!  For this week’s Throwback Thursday, I’m sharing this Victorian Style Valentine Banner Tutorial.  Several of you requested a “banner of the month” post for 2023, and I cannot think of anything that would be more fun!  We’ll kick this through the year series off with a dreamy, romantic banner made with Graphic 45’s Time to Flourish February papers and loads of goodies from Reneabouquets.

Time to Flourish, Graphic 45-February Banner-Kathy Clement-Kathy by Design-Reneabouquets

Here’s a look at this big, beautiful banner hanging from the chalk board in my kitchen.  The 7 pennants are stitched onto netting, and measure over 4 feet in length: a perfect size to display on a mantel or even a bookcase.

Graphic 45-Time to Flourish-Home Decor Banner- Kathy Clement-Kathy by Design-Reneabouquets-Really Reasonable Ribbon-Kathy Clement-Kathy by Design

Banners are loads of fun to make, but man, are they ever difficult to photograph!  It’s hard to really see the details unless you photograph in segments.  So that is what I did!

Romantic Victorian Details

Victorian Home Decor-Valentine Banner-Reneabouquets-Graphic 45-Time to Flourish-Valentine's Day, Kathy Clement-Kathy by Design-Reneabouquets

Putting the banner together is a step by step process.  Like most things in life, it seems complicated unless you break it down into manageable segments.

  • First, cover 4 Graphic 45 Ivory ATC tags with red cardstock.  Use the G45 ATC die, and this only takes a minute.
  • Next, cut another set of ATC tags using Time to Flourish February papers.  Fold each tag in half and trim about 1/8″ off around the edges to create a pretty layered effect.
  • Use paper clips or binder clips to attach the ATC tags to the netting ribbon.  Then stitch them onto the netting. Add the details to the tags after you’ve stitched the banner together.
Roses are Red…or Pink!

Graphic 45-Time to Flourish-Valentine Banner-Reneabouquets- Kathy Clement-Kathy by Design

The 3 large pennants are die cut with Eileen Hull’s House/Pocket Stitchlets Dies.

  • First, Die cut the red cardstock background using only the outer frame.
  • Next, center the inner die inside the frame.  Use a little tape (I like Post-It’s Notes Tape) to hold the inner die in place.  Then cut 3 pennants from patterned paper.
  • Now place the patterned paper pennants on your cutting tool.  Line the blade of your tool up so that it is in the center of the small die cut circles.  Trim so that you have a postage stamp edge on the patterned paper.
  • Then place a small piece of double sided adhesive on the back of the patterned paper so that it will stay in place on red canvas ticking fabric while you stitch the layers together.
  • Adhere the stitched pennant to the red pennant and clip onto the netting ribbon.  You will have an ATC tag, then a large pennant, then an ATC tag, etc.

TIP: Dry brush the edges and lightly spatter the printed Beautiful Board with ivory chalk paint to lend a more vintage finish.

Love is in the Air!

Assemble the two interior ATC tags the same way as before.  Decorate them with a heat embossed chipboard heart and postage stamps.

TIP: Assemble the individual pennants, then stitch onto the netting.  Now it is time to add the lace trim at the top of the stitched banner.  After that, you can decorate each pennant.  Then add the bows and flower clusters to the ends of the banner.  Finish with flowers.

I’m in Love: I’m All Shook Up

The center pennant is the star of the show with a frilly shaker heart as the focal image.  Here’s how to achieve this effect.

  • First, heat emboss a large heart frame with Stampendous Shabby Pink Embossing Enamel.
  • Now use Dries Clear Adhesive to adhere clear cardstock (acetate sheets) to the back of the embossed frame.  When the glue is dry, trim out the heart.
  • While the glue is drying, ink up a nice pile of heart shaped Beautiful Bits with Picked Raspberry, Worn Lipstick, and Spun Sugar Distress Ink.
  • Inking TIP:  I put the hearts in a small plastic bag and dropped a few drops of re-inker into the bag.  Then I squished the beautiful bits around until they were covered.  Easy peasy!
  • Next, add 3 rows of 1/8″ foam strips to the back of the heart frame.
  • Then cut out a 4 1/4″ x 4 1/4″ panel from the Time to Flourish cut apart page.  Place your inked beautiful bits, sequins, beads and buttons on the 4 1/4″ square of paper.  Then center the heart frame and press in place.
  • Adhere the heat embossed LOVE sentiment on the cover of the frame.
  • Place foam adhesive on the back of the Valentine Fairy and butterfly.
More Details

Because the gorgeous lace trim is difficult to machine stitch, I simply hot glued it to the top of the banner.

Victorian Style Valentine Banner Tutorial on YouTube

If you’d like to see me put this banner together, then I hope you’ll enjoy this YouTube tutorial.

If you’d like to see other banner creations from my archives, please click HERE.

Let Me Hear from You!

Now I need to hear from you: How do you feel about a banner of the month post?  If you are interested, then I am, too!

You’ll find a linked supply list below this post.

Thanks for stopping by!

Cheerio,

kathy

SUPPLY LIST

8 thoughts on “Victorian Style Valentine Banner Tutorial

  1. MaryH

    Makes me want to binge watch the Golden Age again. This marvelous creation absolutely oozes the feeling of love and beauty. Such a great tip about coloring the hearts – that creative drive and inspiration of yours was on overdrive for this Victorian inspired project! I am in LOVE!

  2. Helen

    You do you Kathy, as the saying goes. Whatever you create, I want to see your videos and uploads. This banner has so many ideas that can be used for other constructions such as folios, cards, or journal covers, just a little imagination and away we go! I wish I was able to purchase some Renea Bouquets products, postage is the problem, they are simply gorgeous!

  3. Rebecca Nicklin

    Even though we can’t all have this banner hanging in our homes, it’s just a pleasure to see your beautiful photos of the project. You’re quite the ambassador for Reneabouquets! Such fantastic products!

  4. Joni E

    This banner is just beautiful! Would love it if you include banner tutorials along with the folio and card tutorials you share with us. Appreciate you sharing your works of art!

  5. Renea Harrison

    Oh this is so Valentine gorgeous Kathy!! I know how hard it is to photo that type of project and I can bet it is even more gorgeous in real life!! I have to go see the video to see it up close and personal. Thank you for such a romantic and inspiring project!!

  6. CHRISTAL GILL

    Wow! This is STUNNING! I love everything about it! Gorgeous Shabby-Victorian Banner! Love the colors, laces, hearts! TFS – Crafty Hugs!

  7. Gena Krannig

    OMG Kathy, it’s been awhile since you did a banner. This one is absolutely stunning! Every pennant is just gorgeous with their nostalgic images. I love the soft colors and all of the lacey effects. Such a perfect creation for decorating for Valentine’s Day! Thank you for sharing! Hugs!

  8. Cheryl Wells

    Kathy – this is stunning!!! I believe in a previous life, that I lived in the Victorian age, as I absolutely love all things Victorian, right down to all the Gingerbread details on the houses – thank you, thank you for sharing this!!!!

Comments are closed.